Temperature max.:300℃;Pressure max.:200bar
Model: BR-500
Order NO.: BR-500
1386
Specific parameters will be adjusted according to product upgrades, without notice.
This high-pressure reactor is ideally suitable for universal experimental runs. This high-pressure reactor is available in stainless steel, Hastelloy, or with PTFE lining on all sides. The working volume of the reactor can be varied between 300 ml and 2,000 ml using different reactor vessels.
The BR series high-pressure reactor is notable for its ease of handling. The reactor is closed using a manual quick closure that can be attached without the use of tools. The reactor seal is established using a conical flange lock and O-ring seal of PTFE, FKM, or FFKM. The appropriate fitting inserts are available in stainless steel.
A total of 6 connection options are provided in the lid, which can be selected from the following:
● Immersion tube for temperature sensor
● Rupture disc of metal for the safe limitation of maximum pressure
● Pressure display
● Vent valve
● 2 spare fittings for other options, such as gas or liquid sampling.
Temperature is regulated using a temperature sensor which detects the inner temperature of the reactor in an immersion tube. A second temperature sensor can optionally be used as an independent overheating safety. Appropriate stand systems are available.
The 7" high resolution display guarantees simple, intuitive operation and optimal visibility of all relevant reactor functions, including temperature, rpm, pressure and safety information.
Features
● 25, 100, 250, 300, 500, 1000, 2000 or 5000 ml / 200 bar / 300℃
● Quick closure chain, to be operated manually without tools
● O-seal ring made of Viton® , PTFE or Kalrez®
● Completely made of SUS 316L
● Heating by electrical or thermostated mantle
● Stirring by magnetic clutch and separate drive
● Optionally internal heating/cooling coil
● Optionally 2'nd thermocouple
Technical Specification
Model | BR-500 | |
Stainless steel | Stainless steel | |
with or without PTFE lining set | without | with |
Temperature max. | 300℃ | 230℃ |
Pressure max. | 200bar | 200bar |
Volume (vessel or PTFE insert) | 630ml | 500ml |
Inner Diameter | 68mm | 62mm |
Inner Height | 175mm | 165mm |
Standard Fittings | Rupture Disc, Vent valve | |
Pressure Measurement | Pressure gauge or Pressure sensor | |
Nozzles (total) | 6 | 6 |
Nozzles (free) | 2 | 2 |
Type of connection | 8mm | 8mm |
Heating mantle | CHM-500 | CHM-500 |
Magnetic stirring | CTM-500 | CTM-500 |
Stirrer motor (Magnetic coupling) | WB201C / WB181D (RV100) |
AChi siamo Contatti Statement Privacy Policy
Copyright © 2024 WIGGENS CO., LTD. All rights reserved.